INSTALLATION
(3) Make a drop cable out of DeviceNet thin cable long enough to extend
from the inverter to the network trunk cable. Remember that the
maximum length of this cable by the DeviceNet standard is 10 feet. On
one end of the cable, install a connector compatible with the trunk cable
and leave free wires on the other end. See figures below.
DeviceNet Drop Cable with
Sealed Connector
To Network Trunk
Cable
Signal
Color
+V
Red
CAN +
White
Shield
Orange
CAN -
Blue
-V
Black
- 4 -
T o F R - E P N
1.5 in.
0.25 in.
Signal Wire
DeviceNet thin cable