Call Tone; Roger Beep; Key Beep - Uniden UH7700NB Owner's Manual

UNIDEN Model uh710sx/uh720sx UHF CB Radio
OPERATION

Call Tone

Your uh710sx/uh720sx radio is equipped with 5 selectable call tones that will
be transmitted when
ENT
1. Press eight times. The current call tone setting flashes.
MENU
2. Press
The 5 call tones are C1, C2, C3, C4 and C5.
3. Press and hold
Current regulations require calling tones to be restricted to one
transmission per minute. If a second transmission is attempted
within one minute then an error tone will sound.

Roger Beep

Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT
and VOX transmission.) Roger Beep can be heard through the speaker when
Key Beep is on. Roger Beep is transmitted even if Key Beep is turned off.
However, Roger Beep will not be heard from the speaker.
ENT
1. Press
MENU
2. Press
3. Press and hold

Key Beep

Assures the user that the keypad has been properly pressed by emitting a
beep tone. This tone can be switched on or off.
ENT
1. Press
MENU
2. Press
3. Press and hold
CALL
is pressed and held.
SCAN
or to select desired setting.
ENT
to save and exit.
MENU
nine times. The current Roger Beep setting flashes.
or to select desired setting.
ENT
to save and exit.
MENU
ten times. The current Key Beep setting flashes.
or to change selection.
ENT
to save and exit.
MENU
23