Korg POLY-800 Owner's Manual page 27

At this point, the sound originally stored in Program
Number ,?j has been erased. and the same sound is
stored in two Program Numbers, : : and ?3.
5. Set the rear panel Program Write switch to the DISABLE
position.
SEQUENCER
ENABLE/DISABLE
It's often convenient to rearange a numbdr of programs into
the order you want to use them in for perfbrmance. As an ex-
ample, assume that you want to use programs 'e:z
and 83 for a paflicular song, in that order.
"free" location (for examplb. 5'-: ),
Select a
Pick a Program Bank to contain the sequence of pro-
grams (for example. Bank 4).
Since you don't want program '7
copy it into the "free" Ication
This opens up Program Number '7
gram that you DO want.
Copy program 'i'z into '-:
PROGRAM
ENABLE/DISABLE
in your sequence.
described above.
the first pro-
This opens up location
Copy program 55 into Ii',? This opens up 55
is full but it's not what you wanf. Copy r3 to 6 5
then copy' 73 to L:j. Now, '-:z is what you wanted,
the OLD program in Y 3 is safe in 5 5
for further movea.
Now, the six programs you wanted are all in Bank 4, in the
proper order -and the six programs that were there before
are safe, but scattered all through Program Memory. If you
like, you can keep on in this manner until every program is
exactly where you want it to be.
After all programs have been moved as desired. return the
rear panel WRITE switch to the DISABLE position.
You can use the Tape lnlerlace to save many different ar-
rangements of programs, for different songs or sets of
Once the programs are organized in this way. you can use
the PROG UP footswitch to easily move through the
programs.
CREATING SOlINnS
and : 3 is open