Furuno GP-7000F Installation Manual page 26

Color gps/plotter/sounder

Hide thumbs Also See for GP-7000F:

Table of Contents

Power source

The power source is a 12-24 VDC battery. Be sure the power cable is tightly fastened to the

power source and the polarity (plus and minus) is correct. Connect the white lead to the

positive terminal(+) and the black lead to the negative terminal(-).

Transducer

Connect the transducer to XDR port on the rear of the display unit. If the optional

speed/water temperature sensor is connected, connect the transducer with the optional

cable 02S4147 (Code No. 000-141-082).

Connection Cable

Type: 02S4147

Code No.: 000-141-082

How to connect transducer and sensor with optional cable 02S4147

Connect to XDR port on display unit

MJ-A6SRMD

Connect water temperature

sensor, speed/water temperature

sensor.

MJ-A10SPF

MJ-A10SRMD

Connect transducer.

Table of Contents