Cd Player/Changer Operation; Mp3/Wma Operation; Cd Changer Operation - Jensen Mobile Multimedia AM/FM/DVD Receiver VM9410 Owner's Manual

CD PLAYER/CHANGER OPERATION

Instructions for Insert/Eject, Play/Pause, Stopping Playback,
Track Selection, Fast Forward/Fast Reverse, Scan, and
Random Play are the same for DVD, CD, CD Changer and
MP3 operation. Please see the DVD Player Operation
section for information about these topics.
NOTE: Upon inserting a disc with the TFT screen open,
the disc and track title (if available), along with the track
number and playing time appear on the screen.
NOTE: CD-R and CD-RW will not play unless the
recording session is closed.

MP3/WMA Operation

This player allows you to playback MP3 files recorded on CD-
ROM, CD-R, and CD-RW. For CD-RW discs, please make
sure it is formatted using the full method and not the quick
method to prevent illegal disc operation.
MP3 Format Compatibility
The file naming formats listed below are compatible with this
unit:
• ISO 9660 – file name: 12 characters, file extension: 3
characters
• ISO 9660 – file name: 31 characters, file extension: 3
characters
• Joliet – 64 characters
If the file or folder name does not conform to ISO 9660 file
system standards, it may not be displayed or played back
correctly.
Use the following settings when compressing audio data for
your MP3 disc:
• Transfer Bit Rate: 320kbps
• Sampling Frequency: 48kHz
When recording MP3 up to the maximum disc capacity,
disable additional writing. For recording on an empty disc up
to maximum disc capacity, use the "Disc at once" setting.
Playing MP3/WMA Files
After inserting a MP3/WMA disc, files will play in the
sequence of the "Root' directory.
Use the numeric keypad (29) on the remote control to access
files directly.
Selecting a Playback Mode
1. Press the STOP button (13) on the front panel or the
BAND button (20) on the remote control to stop disc
play.
2. Press the button (19) on the remote control or the
button on the joystick (17) to enter playback mode
(PLAY MOD).
3. Press the , , or buttons (18, 17, 19) on the
remote control, or the or button (16, 17) on the
joystick to choose from the following playback options:
Table 17: MP3/WMA Playback Modes
Play Mode Playback Details
Disc Normal Playback all files on the disc
and stop at the end
Disc Repeat Repeat playback of all files on
the disc
Shuffle Randomly play all files and stop
at the end
Single Track Play a specific file and stop
Repeat Track Repeat playback of a specific
file
Folder Normal Play all files in a folder and stop
at the end
Folder Repeat Repeat playback of all files in a
folder/directory
4. Press the button (14) on the remote control to
confirm the playback mode then press the
to begin playback.

CD Changer Operation

This unit is capable of operating a SANYO CD changer.
Please use the remote control supplied with your changer
when the changer is in use.
NOTE: The Scan, Random, and Repeat features are not
available in CD Changer mode.
Accessing CD Changer Mode
Once the CD changer is properly connected, press the SRC
button (15) on the front panel or remote control (8) to switch
to CD Changer mode.
Random Playback
With a CD playing, press the 5/RDM button (12) on the front
panel or the RDM button (33) on the remote control to
20
activate random playback and play all tracks in random order.
"Shuffle On" appears on the screen.
/
Press the 5/RDM button again to randomly play all the discs.
The "RDM" and "ALL" indicators appear lit on the display.
Press the button (19) on the remote control or the
button on the joystick (17) to play the next random track.
Press the RDM button again to turn random play off. "Shuffle
Off" appears on the screen.
Moving Through Discs
Press the DISC button (12) on the remote control or the 1/
DISC- button (8) on the front panel to move to the previous
disc.
Press the DISC button (11) on the remote control or the 2/
DISC+ button (9) on the front panel to move to the next disc.
button (18)
VM9410