Orbit baby Toddler Manual page 28

54
54
Installation with Braces & Lap Style Vehicle
V
Seat Belts (without Orbit Base) cont'd
10. If the seat is not level (Photo V), remove
the seat and reinstall by repeating steps
3 to 9. If the Toddler Car Seat cannot be
secured tightly and leveled, try any of
the following:
a) Try installing the Toddler Car seat in a
different seating position
W
b) Remove the seat. Position a rolled
towel underneath it (Photo W) and
repeat steps 2 to 9.
c) Seek assistance from one of the
resources in the "Need Help Securing
Your Toddler Car Seat and Base?"
(page 27).
11. Close the Upholstery Lower Panel.
NOTE: The Toddler Car Seat must be
property reclined to prevent ejection.
Do not use until properly installed.
55
Notes
55