Navigate - Uniden GPS9000NZ Owner's Manual

GPS Qk newfont 2/13/02 4:05 PM Page 15
Note: • To exit from the Menu function, press
If no key is pressed within 30 seconds, the
GPS9000NZ will return to the display screen.
• If the detector cannot receive signals from the GPS
satellite, "Searching for Satellite" scrolls across
the display.

Navigate

Navigational information such as time to go, distance to go and
a directional arrow for your destination will be shown on the 8
digit LED display.
To enter into this mode, select "Navigate" using
Press
SELECT/TRAP
you wish to navigate to. Once the desired location is displayed
press SELECT/TRAP
Note: • Home, Work, Airport, Hotel, Boatramp. User 1-15 must
first be programmed with a location before you can
navigate to them.
(see mark location P15)
Searchin
RED
No GPS Satellite Signals
. Use or to select the location
to program the location.
"Menu Mode"
SELECT/TRAP
EXIT/ALERT
Navigate
GREEN
SELECT/TRAP
GREEN
OFF
City
GREEN
Home
GREEN
Work
GREEN
Airport
GREEN
GREEN Hotel
GREEN BoatRamp
GREEN User 1
User 15
13
EXIT/ALERT