Group Scan (Gs) Mode - Uniden UH088SX CB Owner's Manual

Uniden two-way radio owner's manual

Hide thumbs Also See for UH088SX CB:

Table of Contents

UNIDEN UHF CB Transceiver

Operation

Group Scan (GS) Mode

Allows you to monitor a priority channel while scanning.

To use GS Mode Scanning, press the

GS icon appears on the display. OS Mode is indicated by the

absence of the GS icon.

GS Scanning checks the priority channel activity regularly.

If the Priority channel becomes active the radio will stay on

that channel for as long as the signal is active.

If the received signal ceases, the unit will wait 3 seconds

for the signal to return, otherwise scanning resumes.

If scanning stops on a channel which is not a Priority channel,

uh088sx will continue monitoring the priority channel for

activity while listening to the active one.

eg CH40 becomes active.

If SCAN is deactivated while it is turned to an active channel, the uh088sx will stay on

that active channel. If none of the channels are active, the uh088sx will reinstate the

starting channel.

If GS is initiated when there are no channels programmed in GS memory, an error tone

will be heard and scanning will not start (see programming Scan Channels - below).

key.

TOGGLES

Table of Contents