Regulatory Information - Motorola RFS4010 Series Installation Manual

5

Regulatory Information

This regulatory section applies to the RFS-4010. For more information refer to section 6, Part
Numbers, Support, and Sales.
All Motorola devices are designed to be compliant with rules and regulations in locations they are
sold and will be labeled as required.
Local langauge translations are available at the following website: http://support.symbol.com
Any changes or modifications to Motorola equipment, not expressly approved by Motorola, could void
the user's authority to operate the equipment.
WARNING!
Power Supply
Use only a Motorola/Symbol approved power supply output rated at 48Vdc and minimum 2.5A. The
power supply shall be Listed to UL/CSA 60950-1; and certified to IEC60950-1 and EN60950-1 with
SELV outputs. Use of alternative power supply will invalidate any approval given to this device and
may be dangerous.
Country Selection
Select only the country in which you are using the device. Any other selection will make the operation
of this device illegal.
Laser Devices - Gigabit Ethernet SFP Option
Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice
No. 50, dated July 26, 2001.
EN60825-1:1994+ A1:2002 +A2:2001
IEC60825-1:1993+A1:1997+A2:2001
The laser classification is marked on the device.
This product is designed and approved for in-building
installation only and is not intended to be connected to exposed
(outside plant) networks.
Regulatory Information 21