Helmet Holder - BMW K 1200 GT Rider's Manual

Installing passenger seat
If too much pressure is
applied in the forward
direction, there is a danger
that the motorcycle will be
pushed off its stand.
Make sure that the motorcy-
cle is steady on its stand.
with OE Seat heating:
Close connector 2.
Push passenger seat un-
der driver's seat and press
down firmly at rear.
Seat engages with an audi-
ble click.

Helmet holder

Helmet holders under
passenger seat
The helmet holder 1 is locat-
ed under the seat.
A motorcycle helmet with chin
strap can be attached to the
helmet holder. If cases are
mounted or if the chin strap
is too short, a steel cable can
be used to secure the helmet.
Using helmet holder
Make sure ground is level
and firm and park the mo-
torcycle.
4
67
z