BMW K 1200 GT Rider's Manual page 114

7
112
The cable of the ABS
sensor could chafe
through if it comes into
contact with the brake disk.
z
Make sure that ABS sensor
cable is routed correctly.
Insert ABS sensor cable in
three retaining clips 3.
Route ABS sensor cable
between brake caliper and
front suspension as shown
in illustration.
Remove adhesive tape from
wheel rim.
Install front mudguard and
screws 1 on right and left.
Press the handbrake lever
firmly a number of times un-
til the resistance point is no-
ticeable.
Removing rear wheel
Placing on center stand
( 83)