BMW K 1200 GT Rider's Manual page 125

Make sure cables are not
pinched.
Install screws 1.
Replacing front turn
indicator bulbs
If it is not standing firm-
ly, the motorcycle could
topple in the course of the
operations described below.
Make sure that the motorcy-
cle is steady on its stand.
Make sure ground is level
and firm and park the mo-
torcycle.
Switch off ignition.
Remove screw 1.
Pull out lamp housing to-
ward front
Disconnect connector 2.
Turn bulb holder 3 counter-
clockwise to remove it from
bulb housing.
Press bulb 4 into bulb sock-
et 3 and remove it by turn-
ing it counterclockwise.
7
123
z