BMW K 1200 GT Rider's Manual page 123

Insert bulb 3 into bulb sock-
et.
Install bulb socket by turn-
ing clockwise.
Left side lamp: connect
connector 2.
Right side lamp: connect
connector 1.
Replacing brake light,
tail light and rear turn
indicator bulbs
If it is not standing firm-
ly, the motorcycle could
topple in the course of the
operations described below.
Make sure that the motorcy-
cle is steady on its stand.
Make sure ground is level
and firm and park the mo-
torcycle.
Switch off ignition.
Remove screws 1.
Pull lamp housing toward
rear out of brackets.
Remove bulb socket 2 (turn
indicator bulb) or 3 (brake
7
121
z