Xerox Integrated Fiery Color Server Quick Start Manual page 17

SERVICING
3-4
Copier mode DHCP Setup
To connect the Integrated Fiery Color Server to the Xerox Color 550
Production Printer, the Systems settings network protocol must be
set to DHCP for the Fiery to properly print to the copier. The below
steps describe the procedure for setting the copier protocol to
DHCP.
1. Press the Log In / Out button.
2. Enter the System Administrator password.
3. Press the Machine Status button on the copier panel.
4. Select Tools.
5. Select System Settings.
6. Select Connectivity & Network Setup.
7. Select Protocol Settings.
8. Set item 2 TCP/IP – IP Mode to IPv4 Mode.
9. Set item 3 IPv4 – IP Address Resolution to DHCP.
10. Select the Close button.
Integrated Fiery Color Server for Xerox Color 550 Production Printer
a. To change IP Mode, select IP Mode.
b. Press the Change Setting button
c. Select IPv4 Mode.
a. To change IP Address Resolution, select IP Address
Resolution.
b. Press the Change Setting button
c. Select DHCP.
7/09 CONFIGURATION TRAINING GUIDE