Panasonic WJ-HD616K Operating Instructions Manual page 94

[Refresh] button
The displayed contents will be updated to the latest.
[Prev page] button
Displays the previous page.
[Next page] button
Displays the next page.
[Time & date]
Displays the start time and date of the recording.
[Ch]
Displays the camera channel used for recording.
Playback of images recorded using the displayed
camera channel will start on a 1-screen.
[Evt]
Displays the event type. Refer to page 8 for further
information about the event type.
How to operate
Step 1
Display the top page of the operation window.
(☞ Page 77)
Step 2
Select "HDD" for "Disk/Medium" in the [Search] box,
and then click the [REC Event] button.
→ The "REC event search" window will be displayed.
94
[HDD]
Displays the hard disk drive number on which images
were recorded.
[Audio]
Displays the icon to indicate whether audio is
attached to the data or not.
Note:
• Recording event list will be displayed when the
[Refresh] button is clicked or when the VMD
search (☞ page 96) or selection of the disk/medi-
um (☞ page 99) is performed.
• The [All list] button will become unavailable during
playback. To use the [All list] button, stop play-
back and click it.
• When many cameras are connected, the record-
ing start time of each camera channel may some-
times not be the same.
Step 3
Specify the search conditions (filters).
Time & date: Designate the recording start time and
date and the end time and date of recorded imag-
es to be searched for.
Select a start time and an end time by clicking the
[C] button.