Foxconn 761GXK8MC User Manual page 39

vSwap Floppy Drive
If you have two floppy diskette drives in your system, this item allows you to
swap the assigned drive letters.
vBoot Up Floppy Seek
This option controls whether the BIOS checks for a floppy drive while booting
up. If it cannot detect one (either due to improper configuration or physical
unavailability), it will appear an error message. Disable this option, POST will
not detect the floppy.
vBoot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your system is
started.
v
Typematic Rate Setting
If this item is enabled, you can use the following two items to see the typematic
rate and the typematic delay settings for your keyboard.
v
Typematic Rate (Chars/Sec)
Use this item to define how many characters per second a held-down key
generated.
vTypematic Delay (Msec)
Use this item to define how many milliseconds must elapse before a held-
down key begins generating repeat characters.
vSecurity Option
When it is set to setup, a password is required to enter the CMOS Setup screen;
when it is set to system, a password is required not only to enter CMOS Setup,
but also to startup your PC, as well.
vAPIC Mode
This option is used to enable or disable APIC function.
vMPS Version Control For OS
This option is used to set up the version of MPS Table used in NT4.0 OS.
32
Chapter 3 BIOS Description