Lock Outgoing Call - LG-Ericsson LIP-8002/8002A Installer's Manual

iPECS
To set the DHCP Options flag:
 Press the Settings (
to section 3.3.
 Press the
digit, or move the cursor to 3.Phone Settings using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 6.S/W Update using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 6.DHCP Option using the navigation buttons and
press the OK button.
 Select the DHCP Option desired using the Up/Down navigation buttons and press the OK
button to save the entry. Options available include "Don't use any Option", "Option 66/150
only", "Option 160 only" and "Option 66/150, 160 both".
 Move to another parameter with the navigation buttons and continue the session or press the
Settings ( ) button to exit the configuration session.
Changing the DCHP Options requires a reboot of the IP Phone; when you leave the
menu, you will receive a reboot notice. The IP Phone must reboot to utilize the new
values entered.
An asterisk, , displays in front of the current selection.
3.6.7

Lock Outgoing Call

The IP Phone can be configured to allow outgoing calls only if a password is entered. When
enabled, the LCD screen will display the password request as shown and the password must be
entered prior to connecting for outgoing call.
To activate this feature, the LCD password must be set, refer to
Call must be enabled.
To enable/disable the Lock Outgoing Call feature:
 Press the Settings (
to section 3.3.
 Press the
digit, or move the cursor to 3.Phone Settings using the navigation buttons and
press the OK button.
 Press the
digit, or move cursor to 7.Lock Outgoing Call using the navigation buttons
and press the OK button.
 Select Yes to enable the Lock Outgoing Call, or select No to disable the Lock Outgoing Call
using the Up/Down navigation buttons and press the OK button.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings ( ) button to exit the configuration session.
) button. If the LCD Menu is locked, use the unlock procedure. Refer
) button. If the LCD Menu is locked, use the unlock procedure. Refer
section 3.3
38
LIP-8002/8002A
Installer Guide
and Lock Outgoing