LG-Ericsson LIP-8002/8002A Installer's Manual page 90

iPECS
Field Name
Section
dst_stop_week_of_month
dst_stop_time
VOIP outbound_proxy_server
outbound_proxy_port
backup_proxy_server
back_proxy_port
message_url
SIP_service_domain
preferred_codec
rtp_port
outbound_proxy_register
prack_mode
user_param
replaces_mode
local_udp_port
Sets week of month DST ends.
Valid values are 1 to 6 and 7, with 1 being the first week,
each number thereafter being subsequent weeks. Seven (7)
represents the last week in the month
The default is 1 for the United States.
Sets the hour of the day DST ends.
Valid values are 0 to 23.
The default is 2 for the United States.
When defined, sends all SIP requests to the outbound proxy
server instead of to the linen_proxy_address. The media
stream is not routed through the outbound proxy.
The valid value is an IP address or FQDN.
Default is blank
Defines the port number of the outbound proxy server.
Valid values are 1024 to 32000.
Default is 5060.
Defines a backup proxy server in case the outbound proxy
server fails.
The valid value is an IP address or FQDN
Default is blank
Defines the port number of the backup proxy server.
Valid values are 1024 to 32000.
Default is 5060.
Defines the voice mail address, IP address or phone number
format.
The valid value is an IP address or telephone number.
Default is blank.
Specifies the SIP service domain.
The valid value is an IP address or FQDN.
The default is blank.
Defines the order of priority of codecs for negotiation.
Valid values are g729, pcmu and pcma.
The default order of priority is g729 pcmu pcma.
Defines the RTP port for media packets.
Valid values are from 16300 to 32700.
The default is 23000.
Enables use of proxy server for SIP requests.
Valid values are enable or disable.
The default is enable.
Disables the use of ACK response to provide reliable
response to SIP requests.
Valid values are enable or disable.
Default is disable.
Defines "user=phone" parameter in the To, From, and
Contact headers of REGISTER messages.
Valid values are disable and enable.
Default is disable.
Enables use of the SIP "Replace" header.
Valid values are enable or disable.
Default is enable.
Defines UDP port used for SIP messages.
Valid values are from 1024 to 32000.
Default is 5060.
84
LIP-8002/8002A
Installer Guide
Description