LG-Ericsson LIP-8002/8002A Installer's Manual page 17

iPECS
data displays while the menu is locked however, the menu must be unlocked using the
password in order to change advanced parameters. Parameters under the 'Phone Settings'
item listed below are not subject to the lock feature, allowing the user access without the need
to enter a password.
LCD Contrast
-
- Ring Type
- Ringer Off
Flexible Button settings
-
Time Configuration
-
Speed Number Dialing
-
- Key Tone
- Language
With the menu locked,
To assign a password:
 Press the Settings (
 Press the
digit, or move the cursor to 7.Lock/Unlock Config using the navigation
buttons and press the OK button. If a password has been previously established, the
previous password must be entered and press the OK button.
 Press the
digit, or move the cursor to 1.Change Password using the navigation buttons
and press the OK button. 2. Remove Password menu removes the assigned password.
 Enter your new password using the dial pad and press the OK button. A password is
composed of four (4) to eight (8) digits.
 To confirm your password, input the new password again and press the OK button.to save
your entry.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings ( ) button to exit the configuration session, which will lock the LCD Menu
automatically if a password is assigned.
To unlock the LCD Menu:
 Press the Settings (
 Press the
digit, or move the cursor to 7.Lock/Unlock Config using the navigation
buttons and press the OK button.
 Enter the password (4 to 8 digits) and press the OK button.
 Press the
digit, or move the cursor to 3.Unlock Menu using the navigation buttons and
press the OK button, the Unlocked message appears for approximately 2 seconds and the
LCD Menu is unlocked.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings ( ) button to exit the configuration session.
With a password assigned, exiting the LCD Configuration Menu automatically locks the
menu.
Entering an invalid password returns an error message followed by the "Enter
Password" display.
(padlock icon) appears in the settings menu.
) button.
) button.
11
LIP-8002/8002A
Installer Guide