Time Configuration; Sntp Server Address - LG-Ericsson LIP-8002/8002A Installer's Manual

iPECS
 Press the
digit, or move the cursor to 3.Phone Settings using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 4.Flexible Button using the navigation buttons and
press the OK button.
 Select the desired flexible button.
 Select a function using Up/Down navigation button and press the OK button. Refer to the
Table 3.6.5-1 Flexible Button Functions.
 If the selected function is Speed dial, enter the speed number and press the OK button.
 Each flexible button can have its own label, enter the label and press the OK button to save
the entry.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings ( ) button to exit the configuration session.
To enter alphanumeric characters select the Mode button. Refer to
character mapping of dial pad digits.
3.6.5

Time Configuration

Within the Time Configuration menu, the IP Address or FQDN of the desired Simple Network
Time Protocol (SNTP) server and the local time zone are defined. In addition, Daylight Savings
Time (DST) is disabled.
The following SNTP server addresses or other private SNTP server addresses may be used for
Time Configuration:
- clock.via.net
- ntp.nasa.gov
tick.ucla.edu
-

3.6.5.1 SNTP Server Address

SNTP is a standard protocol that permits a network device to obtain the network's current time.
For operation with SNTP, the IP Phones require an SNTP server IP address or FQDN.
To assign the SNTP Server Address:
 Press the Settings (
 Press the
digit, or move the cursor to 3.Phone Settings using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 5.Time Configuration using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 1.SNTP Server Address using the navigation
buttons and press the OK button.
 Input the SNTP Server Address using the dial pad and press the OK button to save the
entry.
) button.
30
LIP-8002/8002A
Installer Guide
Appendix E for the