Driver Installation For Windows 98Se/2000/Me/ Nt4.0 - Premio Computer Athena System Manual

Chapter 4
Driver Installation for Windows
NT4.0
Note 1: Install Windows
fore installing the VIA drivers into Windows
Note 2: Install Windows
ing the VIA drivers into Windows
Installing VIA
1. Insert the supplied CD disk into the CD-ROM drive.
2. The CD will auto-run and the setup screen will appear.
3. Click on Via Chipset Drivers and follow the on-screen instructions
to complete the installation.
4. Restart the system for the new chipset driver.
Installing Sound Drivers
1. Make sure the supplied CD disk is in the CD-ROM drive.
2. Go to My Computer and double click the CD-ROM icon. The setup
screen will appear again.
3. Click on Avance Sound Drivers and follow the on-screen instructions
to complete the installation.
4. Restart the system.
One Touch Setup:
In Windows 2000/ME, you may see the One Touch Setup button
appear on the setup screen. Choosing the button will help you to
install more than one driver into the system without going
through the installation process step by step and save a lot of time
accordingly. After clicking on One Touch Setup, a window will
show up indicating what drivers will be installed. Install other
drivers not included by One Touch Setup manually if any.
®
2000 Service Pack2 or the latest version be-
®
NT4.0 Service Pack 6 or above before install-
®
Chipset Driver
®
98SE/2000/ME/
®
2000.
®
NT.
4-2