Setting Option Setup Method - Samsung AQV09VBA Service Manual

3-4 Setting Option Setup Method

Step 1 : Enter the Option Setup mode.
1 Take out the batteries of remote control.
st
2 Press the temperature
nd
the battery again.
3 rd Make sure the remocon display shown as
Step 2 : Enter the Option Setup mode and select your option according to the following procedure.
1
5
 Setting is not required if you must
a value which has a
3-4
ex) Option No.
button simultaneously and insert
1 1
2
3 2
3
4
6
4
5
6
default.
:
.
The default value is .
Otherwise, push the button to .
Every time you push the button, the display panel reads
repeatedly.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
 . . .        repeatedly.
Push the button to set the display panel to .
10
Every time you push the button, the display panel reads
 . . .        repeatedly.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
 . . .        repeatedly.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
 . . .        repeatedly.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
 . . .        repeatedly.
or
 
 
 
 
 
Samsung Electronics