step
1
Charge the Battery
1.
1
Connect the power cable in
the order indicated below.
@
CHARGE
1.
2
Insert the battery into the battery charger by
sliding the battery forward (G)), and press down
until it locks into place(@).
• CHARGE lamp starts blinking when charging starts.
• A fully-exhausted battery charges in about two
hours and 30 minutes.
• When charging is complete, the CHARGE lamp
stops blinking .
....._ Page 17 of the
Reference Manual
1.
3
When charging is complete, remove the battery, and then unplug the charger.
step
2
Attaching the Camera Strap for Land Use
Remove the strap for land use before using the camera underwater.
First Steps