Vibration Reduction - Nikon COOLPIX AWIOO Quick Start Manual

Vibration Reduction

Press the d button M z tab (A11) M Vibration reduction
Specify the vibration reduction setting for shooting still pictures or movies. Correct
blur, caused by slight hand movement known as camera shake, that commonly
occurs when shooting with zoom applied or at slow shutter speeds.
When using a tripod to stabilize the camera, set vibration reduction to Off.
Option
V
On (hybrid)
On (default
g
setting)
k Off
The icon for the current setting other than Off is displayed on the monitor (A6).
B
Notes on Vibration Reduction
• It may take a few seconds to activate vibration reduction after the power is turned on or the camera
enters shooting mode from playback mode. Wait until the display stabilizes before shooting.
• Due to characteristics of the vibration reduction function, images displayed on the camera's
monitor immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
• When the camera shake is extremely high or low, picture compensation with electronic VR may not
be possible even when On (hybrid) is set.
• When the shutter speed is fast or extremely slow, electronic VR may not operate even when On
(hybrid) is set.
• When electronic VR in On (hybrid) operates, saving the picture takes longer than normal, because
when the picture is shot, the shutter is released twice automatically to perform picture
compensation. Shutter sound (E76) is heard only once. One frame is recorded.
Record with optical compensation for camera shake during still
picture shooting using the lens shift method, and under the
following conditions, also performs electronic VR using image
enhancement.
• When the flash does not fire
• When the shutter speed is slower than 1/60 second
• When the self-timer is off
• When Single is selected for the Continuous setting
Compensate for camera shake using the lens shift method. The
camera automatically detects the panning direction and only
corrects for vibration caused by camera shake.
When the camera is panned horizontally, for example, vibration
reduction only reduces vertical shake. If the camera is panned
vertically, vibration reduction only compensates for horizontal
shake.
Vibration reduction is not enabled.
Description
The Setup Menu
E73