MSI LPX ZX4 User Manual page 89

2.3 Using "SiS TV-OUT"
If there are S-connector or composite connector in your adapter and you had
connected your TV to one of this connector (S-connector would get more
better quality) and you had turned TV on and you are in one of 640x480x60Hz
modes for NTSC and 800x600x56Hz modes for PAL. Then,
1. Go to "Display Properties" Screen and you will find that "SiS TV-OUT" item
had been added.
2. First select "SiS TV-OUT" item and you may
Use "Color Calibration Turning" to tune your color TV to get color if it
appears black/white.
For NTSC, use "NTSC" to select "640x480 60Hz" to get full TV display
but some information would be invisible. Or select "560x420 60Hz" to
get a small display screen on your TV.
For PAL, use "PAL" to select "800x600 50Hz" to get full TV display but
some information would be invisible. Or select "720x540 50Hz" to get a
small display screen on your TV.
Use "Screen Position" to adjust your TV display position.
Use "AntiFlicker Mode" to adjust the anti-flicker effect.
6-5