MSI LPX ZX4 User Manual page 71

IRQ-15
DMA-0 assigned to : PCI/ISA PnP
DMA-1 assigned to : PCI/ISA PnP
DMA-3 assigned to : PCI/ISA PnP
DMA-5 assigned to : PCI/ISA PnP
DMA-6 assigned to : PCI/ISA PnP
DMA-7 assigned to : PCI/ISA PnP
The above settings will be shown on the screen only if "Manual" is
chosen for the Resources Controlled By function.
Legacy is the term which signifies that a resource is assigned to the
ISA Bus and provides for non PnP ISA add-on card. PCI/ISA PnP signifies
that a resource is assigned to the PCI Bus or provides for ISA PnP add-on
cards and peripherals.
Assign IRQ for VGA
Lets the user choose which IRQ to assign for VGA card.
Assign IRQ for USB
Set to Enabled when USB port will be used. Set to Disable if the
USB port will not be used.
Used MEM base addr
Lets the user choose the Legacy ISA addr. The settings are NA#,
C800, CC00, D000, D400, D800 or DC00.
Used MEM base addr
Lets the user choose the Legacy ISA addr. memory length. The
settings are 8K, 16K, 32K, or 64K.
assigned to : PCI/ISA PnP
4-26
®