MSI LPX ZX4 User Manual page 90

Use "Y Filter" to turn Y-filter on (image would be softer) or off (image
would be sharper).
Use "TV-Mode" to turn TV output on or off.
Note1: SiS6326 only supports TV-OUT function in the following modes:
- For NTSC, 640x480x60Hz and 640x400x60Hz (hidden)
- For PAL, 800x600x60Hz and 640x480x50Hz (hidden)
- Low resolution modes but they are hidden and used by application
programs and cannot be select for end user
Note2: If TV output is turned on, the display frame rate would be forced
to 60Hz. Only when you turn off TV output and close "Display
Properties" then enter "Display Properties" again, the "Display Modes"
would appear and let you set other frame rates.
3. After completing selection, select "OK" or "Apply" to complete the whole
setting.
4. Two cases happen :
If you did not change "NTSC" selection, you may continue your job.
If you change "NTSC" selection, program would refresh the screen and
ask if you want to keep it. Just click "Yes" if you want to keep it. Or click
"No" if you don't want to change
2.4 Using "SiS Gamma Correction"
If you are in TV-OUT enable modes and in 16-bit color (64K-color) or 24-bit
color (true color) modes, you may use "SiS Gamma Correction" to adjust your
TV display quality to your favorite style.
1. Go to "Display Properties" Screen and you will find that "SiS Gamma
Correction" item had been added.
2. First select "SiS Gamma Correction" item and you may
- Use "Setting Gamma" to tune your color TV's color style.
- Use "Default" to return to the original program default setting.
- Use "Brightness" to turn your TV to brighter or darker.
3. After completing selection, select "OK" or "Apply" to complete the whole
setting.
6-6