Home And Office Set-Up - Cobra 25 NW Operating Instructions Manual

Base Station Operation
(From 120V AC House Current)
To operate your transceiver from home or office
you will need a 13.8 volt DC Power Pack rated at a
minimum of 2 amps, and a properly installed base
station antenna.
Simply connect the red (+) and black (-)
1
leads of the transceiver to the corresponding
terminals of the power pack.

Home And Office Set-Up

+ —
Base Station
Operation
(From 120V AC
House Current)
Warning!
Do not attempt to operate this
transceiver by connecting it
directly to 120 vac.
Note
For further information call
Cobra Customer Service
1.773.889.3087.
23