Manual Operation (Without Remote Control) - White-Westinghouse WAS12P5CHLWP Instruction Manual

Press AIR DIRECTION button to lock
louver in desired position.
The AIR DIRECTION and SWING buttons
will be disabled when the air conditioner
is not in operation (including when the
TIMER ON is set).
Do not operate the air conditioner for
long periods with the air flow direction
set downward in cooling or dry mode.
Otherwise, condensation may occur on
the surface of the horizontal louver
causing moisture to drop on to the floor
or on furnishings.
Do not move the horizontal louver
manually. Always use the AIR
DIRECTION or SWING button. If you
move this louver manually, it may
malfunction during operation. If the
louver malfunctions, stop the
airconditioner once and restart it.
When the air conditioner is started
immediately after it was stopped, the
horizontal louver might not move for
approximately 10 seconds.
Open angle of the horizontal louver
should not be set too small, as
COOLING or HEATING performance
may be impaired due to too restricted air
flow area.
Do not operate unit with horizontal
louver in closed position.
When the air conditioner is connected to
power (initial power), the horizontal
louver may generate a sound for 10
seconds, this is a normal operation.
How to use the indoor unit
43

Manual operation (without remote control)

Manual operation can be used
temporarily in case you can not find
the remote controller or its batteries
are exhausted.
1. Open and lift the front panel up to
an angle until it remains fixed with
a clicking sound.
2. One press of the manual control
button will lead to the forced AUTO
operation.
3. Close the panel firmly to its
original position.
Attention
Once you push the manual button, the
operation mode is shifted in an order
as: AUTO, COLD, OFF.
Push the button twice, the unit will
operate in forced COLD mode. This is
used for testing purposes only.
Third press will stop the operation and
turn off the air conditioner operation.
To restore the remote controller
operation, use the remote controller
directly.
Manual control
button
Auto/Cold
Manual operation
44