Remote Control; How To Insert The Batteries - White-Westinghouse WASC09C2ADLW Instruction Manual

Split type room air conditioner
Table of Contents

Advertisement

Remote control

How to insert the batteries

Remove the cover from the battery
compartment , by sliding it in the
direction of the arrow. Insert the new
batteries, ensuring that the (+) and (-)
directions are correct. Refit the cover
by sliding it into place.
When you insert the batteries for the
first time in the remote control or if you
change them,you will see a DIP switch
under the back cover.
After adjusting the function, you need
to take out the batteris and repeat
again the procedure described above.
DIP switch
on position Function
The display is adjusted in degree celsius
ºC
The display is adjusted in degree fahrenheit.
ºF
The remote control is adjusted in only cooling mode
Cool
The remote control is adjusted in only heating mode
Heat
Attention
Use 2 LRO 3 AAA (1.5V) batteries. Do
not use rechargeable batteries.
Replace the old batteries with new
ones of the same type when the
display is no longer legible.
The remote control batteries must be
disposed of in accordance with the
applicable laws in force in the country
of use.
29
Remote Control
When you insert the batteries for the
first time in the remote control or if you
change them, you need to program
the remote control of only cooling or
heat pump air conditioners.
This is very easy:as soon as you insert
the batteries, the symbols
(COOL
)
and
(HEAT
) start fashing. If you
push whatever button when the
symbol
(COOL
) is displayed,the
remote control is adjusted in only
cooling mode . If you push whatever
button when the symbol
(HEAT
) is
displayed, the remote control is
adjusted in heating mode.
1. Direct the remote control toward the
conditioner.
2. Check that there are no objects
between the remote control and the
receiver on the conditioner.
3. Never leave the remote control
exposed to the rays of the sun.
4. Keep the remote control at a
distance of at least 1m from the
television or other electrical
appliances.
Attention
If you adjust the remote control in
cooling mode, it will not be possible to
activate the heating function in units
with heating pump. You need to take
out the batteries and repeat again the
procedure.
Signal receptor
Remote Control
30

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents