Skoda AMUNDSEN+ Owner's Manual page 25

Traffic problems received via TMC which affect the route are displayed in the map
by means of a coloured symbol. Traffic problems, which do not affect the route, are
displayed in the map by means of a grey symbol. The positioning of the TMC symbol
shows the beginning of a traffic disruption and the direction, when the TMC traffic
report is able to clearly define both.
When the function Dynamic Route  page 20, "Settings in the (NAV) Navigation
mode" is activated and the radio navigation system calculates a time advantage for
driving around the traffic disruption along the route, an alternative route is calcu-
lated automatically.
When recalculating the route, a corresponding navigation announcement is output.
The same announcement is made when there was a traffic disruption in the original
route calculation which has since been removed.
Note
•
Making a diversion from a traffic jam based on TMC traffic reports may not
always offer a time advantage, e.g. if the diversion route is also congested.
•
If a traffic disruption was not yet entered via the TMC traffic reports, route
disruptions can also be entered manually  page 23, "Blocking stretches of the
journey".
Displaying stretches of the journey
Pop-ups during route guidance
Press the button followed by the function key

The list of the points (street names, street descriptions and stretches of the

road) still to be driven, is displayed in the
Details - show details for the selected stretch of the journey.

Blocking stretches of the journey
Manually blocking a stretch of the route ahead (e.g. due to a reported traffic
impairment)
Press the button followed by the function key

- turn the button
Congestion ahead

blocked from the current position. The length of the currently blocked stretch of the
journey is shown in the lower line of the screen. When reaching the maximum block-
able length the word "(Max)" will appear next to the length entry.
OK - confirms the length of the blocked stretch

.
Route
.
Route list
.
Route
A
to select the length of the stretch to be
15
To remove the block of a stretch ahead, press the button
tion key .
Route
Lift cong. excl. - manually remove blocked stretch

Blocking stretches of the journey using the route list
Press the button followed by the function key

- opens the list of route sections
Route list

- select the start of the stretch to be blocked
Exclude

Exclude to - select the end of the stretch to be blocked

To remove the block of the stretch, press the button
.
Route
- remove the blocked stretch
Lift cong. excl.

Stopping route guidance
During route guidance, press the button
function key - stop route guidance (stop).
Stop
Resuming route guidance
Press the button NAV followed by the function key
from the current vehicle position.
NAV mode (Navigation)
followed by the func-

.
Route
followed by the function key

(or touch the screen) followed by the
NAV
Start - resume route guidance
23