Skoda AMUNDSEN+ Owner's Manual page 21

Navigation data and the memory card
The navigation data are already available after the memory of the radio navigation
system is switched on first and can be used directly for navigation.
Update navigation data
– Remove the mechanical copy protection from the memory card.
– Insert a memory card  page 12, "Inserting and removing the memory card"
The following appears automatically after you insert the memory card:
assigns the memory card to the radio navigation system. For licensing reasons, the
memory card is assigned to your radio navigation system and cannot be used in a
different radio navigation system.
Use SD - use the navigation data directly from the memory card. If you want to

use navigation data from other regions which differs from the data stored in the
memory of the radio navigation system, you can also use data directly from the
memory card for guidance. This means you have two different sets of navigation
data at your disposal. This means it is not necessary to copy the navigation data
from the memory card to the memory of the radio navigation system.
- copies the navigation data from the memory card to the internal
Install

memory of the radio navigation system. The "old" navigation data in the internal
memory of the radio navigation system are deleted. Data cannot be recovered once
deleted  .
No navigation data is available during copying. The copy process takes around 2
hours.
Do not remove the memory card during the process of copying data from the
memory card to the internal memory of the radio navigation system! You can
damage the memory card
Manual copying
If you insert the memory card with valid navigation data but the copy process does
notstart automatically, you can start it manually.
→
Press the button NAV SETUP
- displays the options for the navigation data
Navigation data basis

Install/use SD data - installs/uses the navigation data from the memory card

Caution
If the navigation data of the radio navigation data is overwritten by a different
version, these data can not be restored!
Note
You can obtain a memory card with the latest navigation data or data for other
countries from Škoda Original Accessories.
Main menu NAV (navigation)
Assign -
Calling the Navigation main menu
Press the button NAV
Switching between the Navigation and Card view main menu
Press the button
NAV
Pressing the button
menu Navigation.
Calling up additional information
Press the button - Information about the vehicle position and access to additional

functions (flagged destination, route list, route list, exclude a stretch)  page 21,
"Store additional window and "Flagged destination"".
Function keys in the Navigation main menu:
Map - switches to the card view
Address - Call up the screen for entering the destination address  page 20,

"Entering and saving destinations"
Destination memory - opens the list of manually stored destinations

Last destinations - opens the list of the last destinations which were automati-

cally stored
NAV mode (Navigation)
Fig. 3 Main menu Navigation
.
- switches from the main menu Navigation to the card view.
again- switches from the card view back to the main
NAV
19