Navigation Basics - Sirius XM RAdio Snap! User Manual

Navigation Basics

Power Button
Pressing the Power button turns the Snap! On or Off.
Control Knob
Rotating the Control knob clockwise or counter-clockwise browses
and selects channels within a category. It is also used to tune to an FM
channel, and to change the audio level.
Scan Button
Pressing the Scan button starts a scan through the channels in the
current category. Each channel plays for 10 seconds. Pressing the Scan
button again stops the scan and the radio tunes to the last channel
being scanned.
Previous/Next Category Buttons
Pressing the Previous or Next Category button selects the previous or next
category. Pressing and holding cycles through the categories.
Menu Button
MENU
Pressing menu once displays the Radio ID of your Snap!. Pressing menu again
displays the Audio Level option.
FM
FM Button
Puts Snap! in FM mode when using Power Connect (or FMDA) as the audio
connection option. When the FM button is pressed it will illuminate to indicate
the FM transmitter is on. The display will show the current FM channel. You can
then tune to a different FM channel, store an FM preset, or choose an FM preset
while Snap! is in FM mode.
27