Sirius XM RAdio Snap! User Manual page 23

the sound quality installation is complete. If you
are not, move to the next FM channel on your list,
and tune your vehicle's FM radio and Snap! to this
new FM channel. Continue until you have found an
FM channel with which you are satisfied.
4 Once you have found a satisfactory FM channel
to use, press and hold 1 until the 1 button is
illuminated. This FM channel is now set as FM
preset 1.
5 Press the FM button or wait 10 seconds to exit
the FM setup. Proceed to "Subscribe" on page
24.
1 2
6 The audio level output of the Snap! can be increased or decreased as
necessary to match the audio levels of other sources in your vehicle. Refer
to "Set Audio Level" on page 32.
7 If the signal reception is good, but there is no audio when tuned to channel
247, verify that both the Snap! and your vehicle's FM radio are tuned to
the same FM channel (steps 2 & 3). Also ensure the chosen FM channel
is a suitable one to use in your area (step 1). Also be sure that the audio
level is set high enough to be heard (step 6). Refer to "Troubleshooting" on
page 36 for additional help.
3 4 5
MATCH FM
CHANNELS
1 2 3 4 5
23