MSI MS-6551 User Manual page 57

Off, the power button works as normal power off button. When set to Suspend,
the computer will enter the suspend/sleep mode if you press the power button.
But if the button is pressed for more than four seconds, the computer is turned
off. Setting options: Power Off, Suspend.
Wake Up On PME, Wake Up On Ring, Wake Up On LAN, USB Wakeup From
S3
These fields specify whether the system will be awakened from power saving
modes when activity or input signal of the specified hardware peripheral or
component is detected.
Note: To use the function of "Wake Up On Ring" and "Wake Up On
LAN", you need to install a modem/LAN card supporting power on
function.
CPU THRM-Throttling
The item allows you to specify the CPU speed (at percentage) to which it will
slow down when the CPU reaches the predetermined overheat temperature.
Settings range from 12.5% to 87.5% at 12.5% increment.
Resume by RTC Alarm
The field is used to enable or disable the feature of booting up the system on
a scheduled time/date.
Date (of Month) Alarm
The field specifies the date for Resume by Alarm. Settings: 0~31.
Time (hh:mm:ss) Alarm
The field specifies the time for Resume by Alarm. Format is <hour>
<minute><second>.
POWER ON Function
This setting controls which part on the PS/2 mouse or keyboard can power on
the system. Settings: Password, Hot KEY, Mouse Left, Mouse Right, BUTTON
ONLY and Keyboard 98. Please note that this function will only work under S3
mode.
KB Power ON Password
If POWER ON Function is set to Password, then you can set a password in the
field for the PS/2 keyboard to power on the system. Please note that this
function will only work under S3 mode.
3-19
BIOS Setup