Using Msi Smart Key - MSI MS-6380 User Manual

Using MSI Smart Key

BIOS Setup
When the Smart Key is inserted into your computer, the BIOS will de-
tect it automatically. You can enable or disable the Smart Key through the
BIOS setting. Please note that it needs a personalized password to ex-
ecute any kind of Smart Key setting; so, keep the password firmly in mind.
If, unfortunately, the Smart Key is lost or the password is missed, you can not
enter the operating system successfully. At this time, contact your local dealer
for further service.
Enable/Disable the Smart Key
The first time installation
1.
Insert the Smart Key into the computer and turn on the power.
2.
Press <F7> during system boot up.
3.
The message as below appears on the screen asking you to
enable or disable the key:
Welcome to MSI Smart Key, please press "Y" to begin,
press "N" to exit
Type <Y> to enable it; type <N> to disable it and bypass the
BIOS to enter the operating system. When you type <Y>, it shows
the following message:
Please input your password and press "Enter"
password:
A-3
MSI Smart Key