Front USB Wake-up Jumper: J12
The J12 jumper is used to set Front USB device wake-up function. To
use the function, you should also go to BIOS to enable the USB wake-up
(power on) function.
5V StandBy (Default)--
Wake Up Function
1
J12
1
3
Enable Front USB
Note: To be able to use this function, you need a
power supply that provides enough power for this
feature. (Power supply with 750mA 5V Stand-by)
VCC 5V --
Disable Front USB
Wake Up Function
2-29
Hardware Setup
1
3