Philips RQ1290 Series User Manual page 18

10 Insert the lug of the shaving unit into the slot in the top of the shaver
(1). Then press the shaving unit downwards (2) to attach it to the
shaver ('click').
1 Slide the trimmer slide forwards to slide out the trimmer.
2 Rinse the trimmer under a hot tap for some time.
3 Slide the trimmer slide backwards to retract the trimmer.
Replacement
For maximum shaving performance, we advise you to replace the shaving
1
(RQ129x/RQ128x only) when you switch off the shaver .
MINUTES LEFT
2 Pull the old shaving unit straight off the shaver.
3 Insert the lug of the new RQ12 shaving unit into the slot in the top
of the shaver (1). Then press down the shaving unit (2) to attach it to
the shaver ('click').
4 RQ128x/RQ127x/RQ126x/RQ125x: To reset the shaver, press and
hold the on/off button for approx. 10 seconds.
ENGLISH
17