ENGLISH
10
After the shaver has charged for 5 minutes, it contains enough energy for
1
Insert the small plug into the charger.
2
Unfold the charger ('click').
3
Put the adapter in the wall socket.
4
Put the shaver in the charger.
,
The display shows that the shaver is charging (see chapter 'The
display').
1
Put the small plug in the Jet Clean System.
2
Put the adapter in the wall socket.
3
Hold the shaver upside down above the holder with the back of the
shaver pointing towards the holder.
4
Place the shaver body in the holder behind the two clips (1) and
press it down until it locks into place (2).
,
The display shows that the shaver is charging (see section 'Charging'
in chapter 'The display').
use your new electric shaver exclusively and do not use other shaving
1
Press the on/off button once to switch on the shaver.
,
The display lights up for a few seconds.