Philips RQ1290 Series User Manual page 14

3 Rinse all three shaving heads and all three hair chambers under a hot
tap for 30 seconds.
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
4 Carefully shake off excess water and leave the shaving heads open to
let the shaving unit dry completely.
Never dry the shaving unit with a towel or tissue, as this may damage the
shaving heads.
The Jet Clean System comes in two types:
- Type RQ1008 has three cleaning programs: the eco program, the auto
-
press the on/off button, the Jet Clean System starts cleaning in the
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
, The holder automatically moves to the highest position.
3 Simultaneously press the release buttons on both sides of the
cleaning chamber (1). Then lift the Jet Clean System off the cleaning
chamber (2).
, The cleaning chamber remains behind.
4
between the two lines.
5 Place the Jet Clean System back onto the cleaning chamber.
ENGLISH
13