Adding Of Rinse Aid - Kenwood KDW12ST3A Instruction Manual

adding of rinse aid

Rinse aid helps to ensure water does
not cling and leave marks on crockery
during the drying phase and helps
crockery dry faster after it has been
washed. Only pour rinse aid that is for
domestic dishwashers into the res-
ervoir. This model is designed to use
liquid rinse aids only.
Please follow the steps below to pour
the rinse aid into the storage reser-
voir, and the amount will dispense
automatically.
1. Turn the cap and open as indicated
in Fig 1.
. When the cap open marking is
aligned (Fig a), you may lift the
cap up (Fig b).
3. Pour the rinse aid until the level
indicator turns completely black in
colour and close the cap. (Fig 3)
4. Be careful not to overfill the reser-
voir. Wipe up any spills. The ap-
proximate volume of the rinse aid
reservoir is 110ml.
NOTE: If the water hardness in your area is soft, you may not need
rinse aid as it may cause white film to develop on your
dishes.
Rinse aid indicator light will illuminate when
the reservoir is running out of rinse
aid and requires refilling.
Alternatively, you can judge the amount of rinse aid by checking the
rinse aid indicator right next to the reservoir's cap. When the indica-
tor is black, it means it is full. When it is clear, it means it is almost
empty.
GB-16
rinse aid indicator
a
3 in 1
1
2
rinse aid indicator on the display screen
1
open
b
3