Kenwood KDW12ST3A Instruction Manual page 32

Kenwood kdw12st3a dishwasher instruction manual
Hide thumbs Also See for KDW12ST3A:
Table of Contents

Advertisement

General problems (continued)
Problem
Dishes, cutlery
and glasses are
not dry.
White residue is
visible on cutlery
and crockery,
clouding occurs
on glassware; film
can be wiped off.
Glassware is dull
and discoloured;
film cannot be
wiped off.
Tea or lipstick
stains have not
been completely
removed.
GB-3
Possible Causes
The amount of rinse
aid may be insuf-
ficient, or the rinse
aid reservoir is
almost empty.
Crockery was taken
out of the dishwash-
er too soon.
Not enough rinse
aid was used.
There is not enough
salt in the salt reser-
voir.
The salt reservoir
cap has not been
screwed on correctly.
Unsuitable deter-
gent has been used.
The salt consumption
setting is too low.
The glassware is not
dishwasher proof.
The surfaces are af-
fected.
The wash tempera-
ture of the selected
programme was too
low.
The bleaching ef-
fect of the detergent
used is too low.
Forgot to pre-rinse
or remove the stains
with a napkin prior
to washing.
Remedy
Replenish the reservoir,
adjust the rinse aid dis-
penser dial to a higher
setting or change the
brand of rinse aid.
Leave the crockery in
the dishwasher until you
hear the audible sound.
Replenish the reservoir,
adjust the rinse aid dis-
penser dial to a higher
setting or change the
brand of rinse aid.
Fill the salt reservoir.
Ensure that it is
screwed back on
correctly.
Change your detergent.
Use a dishwasher stan-
dard powder detergent.
Select a higher salt con-
sumption setting.
Wash the non-dish-
washer proof glassware
by hand.
Select a programme
with a higher wash
temperature.
Change your detergent.
Pre-rinse or remove the
stains with a napkin
prior to washing.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents