Microphone Hang-Up Clip; Standard Hang-Up Clip; Handheld Hang-Up Box; Completing The Installation - Motorola Astro XTL 1500 Installation Manual

Standard Configurations: Microphone Hang-Up Clip
2.6

Microphone Hang-Up Clip

2.6.1

Standard Hang-Up Clip

The hang-up clip must be within reach of the operator(s). Measure this distance before actually
mounting the bracket. Since the bracket has a positive-detent action, the microphone can be
mounted in any position. The microphone hang-up clip must be grounded.
Use the hang-up clip as a template to locate the mounting holes. To avoid interference when
removing the microphone, install the flathead screw in the top clip hole.
2.6.2

Handheld Hang-Up Box

Use the hang-up box (HUB) as a template to locate the mounting holes. Be sure the HUB will be
within easy reach of the operator. Open the accessory cable connector and connect the HUB control
wire to location 3 of the accessory connector. Connect the other control wire from the HUB to a
convenient solid chassis ground point.
2.7

Completing the Installation

Complete the installation by connecting the power wires and plugging in the microphone cable. Be
sure to connect the microphone S-hook to the holes in the trunnion provided (see
strain relief.
6815851H01-O
2-11
Figure 2-7) for
June 3, 2005