Toshiba Stratagy iES32 Installation Manual page 7

Step 4: Install Stratagy iES32
CAUTION! See cautions under
1. Locate the proper slot for iES32. (See tables below.)
2. Insert the card into the appropriate slot, and apply firm, even pressure to ensure proper mating
of connectors.
CAUTION! Do not hit the board for proper seating. This can damage iES32 components.
Strata CTX100
There are four slots (S101~S104) in the base cabinet and four slots (S105~S108) in the expansion
cabinet available for use by iES32. The following figure and table gives you the information on the
number of ports available for installation in each slot.
S101 S102
16 ports 16 ports 16 ports
<16 ports Empty 16 ports
If more than 16 ports are to be used in slots S101, S105 or S107, then the corresponding slot S102,
S106, or S108, respectively, must be left empty.
Stratagy iES32 Installation Guide
Step 1 on
Base Cabinet
S101 S102 S103 S104 S105 S106 S107 S108
CTX100 Cabinet Slots
S103 S104 S105
16 ports 16 ports
16 ports <16 ports
06/02
page 1 before proceeding.
Expansion Cabinet
6093
S106 S107
16 ports 16 ports
Empty <16 ports
Stratagy iES32 Installation Guide
Step 4: Install Stratagy iES32
S108
16 ports
Empty
3