Toshiba Stratagy iES32 Installation Manual page 5

Stratagy iES32 Installation Guide
This guide gives the initial steps to set up the Stratagy iES32 hardware. Please read the entire
contents of this guide before beginning installation. See your Stratagy ES I&M Manual for
additional details.
Step 1: Unpack and Inspect Stratagy iES32
1. When you receive the system, examine all packages carefully and note any visible damage. If
you find any damage, do not open the packages. Contact the delivery carrier immediately and
make the proper claims.
2. Check the items contained in the packages against the packing list. In addition to the hardware
components, you should receive an anti-static wrist strap, a caution sticker and a
documentation package with iES32 .
3. Inspect all equipment for damage. If equipment is missing or damaged, contact your supplier
immediately.
4. Remove any shipping tape and packing material used to protect the system during shipment.
Retain the packing materials for re-use when transporting system hardware.
CAUTION!
You will be handling iES32 when it is most fragile — unpacked and exposed. The iES32, if
handled properly, will give long, reliable service. To ensure that the unit is not damaged
during installation or maintenance, follow these precautions.
Damage may not always be immediately evident (e.g., no physical damage on the outside of
the unit) and system failure may result weeks or months later.
•
Handle iES32 with care. Mechanical shock from dropping, shaking, excessive force when
seating the board into the slot, rocking a connector on or other activities can severely
damage the disk assembly or the disk's printed circuit board.
•
Wear the anti-static wrist strap included in the package. It can also be re-used and left
with the Strata CTX cabinet. An electrostatic charge from your body can damage the
drive or circuitry permanently.
•
Hold iES32 by the edges or the knob on the control panel and never touch the board's
surface. Pressure on the printed circuit board or contaminants from your hands (e.g.,
skin oil, food particles, hand lotion) can cause component failure.
Stratagy iES32 Installation Guide 06/02
1