What's In The Box; Installing The Module; Reader Module Overview And Port Descriptions; Cisco Physical Access Reader Module - Cisco Physical Access Gateway Quick Start Manual

4

Cisco Physical Access Reader Module

What's In the Box

Each Cisco Reader Module includes the following:
• Six resistors (1K) for supervised input interfaces
• Two mounting brackets, with 4 screws for each bracket
• Regulatory compliance and safety information
• Quick start guide
• Connector plugs, including the following:
Type Quantity
10 Pin 1
3 Pin 4
2 Pin 6

Installing the Module

See Wall Mounting a Gateway or Optional Module, page 7.

Reader Module Overview and Port Descriptions

The Cisco Reader Module includes ports for connecting up to two doors and associated input and output devices, as shown in
Figure 4.
Figure 4 Cisco Reader Module Ports and Connectors
9
8
7
6
4
8
5
2
1
2
3
78-18554-05