Water Hardness Level; Rinse Aid; Sensor Wash; Autoopen - Miele G5930 Operating Instructions Manual

Settings menu

Water hardness level

Your dishwasher is fitted with a water
softener which you need to programme
to the water hardness level in your area
(see "Before using for the first time,
Programming the water hardness
level").

Rinse aid

You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from
approx. 0-6 ml.
The factory default setting is 3 ml.
If the function to adjust the Sensor wash
programme has been activated, the
amount of rinse aid dispensed in the
Sensor wash programme can be higher
than that set.
If spots appear on crockery and
glassware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
^ Select the rinse aid dosage you want
and confirm with
80
!
OK
.

Sensor wash

You can adjust the Sensor wash
programme so that it will remove
stubborn soiling in a lightly soiled load.
^ Select the option you want and
OK
confirm with

AutoOpen

At the end of programmes with a drying
phase (except "Extra quiet"), the door
will automatically open a little in order to
help the drying process (see the
Programme chart).
This function can be deactivated if
wished.
^ Select the option you want and
OK
confirm with
,
If you have deactivated the auto-
matic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully. Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.
.
.