Specifications - Hitachi DB 3DL2 Technical Data And Service Manual

1. Specifications

Item
Screw driving
Capacity
Drilling
Tool retainer
Rotation speed
Torque
Type of motor
Type of switch
Enclosure
Type of battery
Nominal voltage
Nominal life
Battery
Nominal capacity
(Type
EBM 315)
Charging time
Charging
temperature
Charger
(Model UC 3SFL)
Net
Weight
Gross
Standard accessories
SPECIFICATIONS SPECIFICATIONS
Model
Machine screw------M 5 (1/5")
Wood screw ---------3.8 mm dia. x 38 mm (#8 x 1-1/2")
Metal ------------------Mild steel ø 5 mm (13/64") [Thickness 1.0 mm (3/64")]
Slip torque ------ 0.3 to 2.9 N·m (3 to 30 kgf·cm, 3 to 26 in-lbs.) [21 stages]
Max. torque----- 5 N·m (51 kgf·cm, 44 in-lbs.)
DC magnet motor
Tumbler switch with forward/reverse changeover pushing button
Body-------------------Glassfiber-reinforced nylon resin (black)
Battery ----------------Polycarbonate resin (black)
Charger---------------ABS resin (black)
Sealed cylindrical lithium-ion storage battery
(with standard accessory charger at ambient temperature of 20°C)
• Overcharge prevention circuit:
A thermostat monitors the battery surface temperature and when
a rise in temperature is detected after the end of charging, the unit is
turned off automatically to prevent the battery from overcharge.
• Input capacity: 21 W
• Indication method: Pilot lamp indicates the charging state.
• Function: On ---------- During charging
Off ---------- Charging completed
Main body (including Type EBM 315 battery) -------------- 0.4 kg (0.9 Ibs.)
Charger unit (including cord) ----------------------------------- 0.3 kg (0.7 Ibs.)
DB 3DL2 (2LCSK) (including Type EBM 315 battery) --- 1.8 kg (4.0 Ibs.)
• Charger (UC 3SFL) ---------------------------------------------------------------1
• Battery (Type EBM 315) ---------------------------------------------------------2
• Phillips plus driver bit (No. 2) ---------------------------------------------------1
• Case-----------------------------------------------------------------------------------1
DB 3DL2
6.35 mm (1/4") bit holder
Low: 200 min
High: 600 min
and thermoplastic elastomer (green)
DC 3.6 V
Charging/discharging: Approx. 500 times
1.5 Ah
30 minutes
10°C to 40°C (50°F to 104°F)
-4-
-1
-1