Hitachi DB 3DL2 Technical Data And Service Manual page 19

(2) Mount the LED to Housing (A).(B) Set [33]. Put the internal wires of the LED between the ribs of
Housing (A).(B) Set [33].
• Mount the LED
Rib
(3) Mount the drive unit to Housing (A).(B) Set [33]. Put the internal wires of the LED and Switch (W/Lock)
[41] through the rib of the housing.
• Mount the drive unit and put the internal wires
(4) Close Housing (A).(B) Set [33] and mount the Handle Cover [39]. Tighten the four Pan Hd. Tapping
Screw D3 x 8 [34].
(5) Mount the two Click Plate [37] to Housing (A).(B) Set [33] and apply grease (Hitachi Motor Grease No. 29).
A
A
Rib
B
-16-
B
Rib