Installation - Toshiba MMU-AP0092H Installation Manual

SMMS 4-way Air Discharge Cassette Type
4

INSTALLATION

REQUIREMENT
Strictly comply with the following rules to prevent damage of the indoor units and human injury.
• Do not put a heavy article on the indoor unit. (Even units are packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit unpacked by
necessity, be sure to use buffering cloth, etc. to not damage the unit.
• To move the indoor unit, hold the hooking metals (4 positions) only.
Do not apply force to the other parts (refrigerant pipe, drain pan, foamed parts, or resin parts, etc.).
• Carry the package by two or more persons, and do not bundle it with plastic band at positions other
than specified.
External view
Ceiling bottom
surface
Ceiling bottom
surface
Knockout for
simple OA
For Ø100
Ceiling bottom surface
Model MMU
AP0092H to AP0122H
AP0152H to AP0182H
Knockout square hole
for divide duct
For Ø150
840 Unit external dimension
Knockout square
hole for divide duct
For Ø150
690 ± 20 Hanging bolt pitch
860 to 910 Ceiling opening dimension
950 Panel external dimension
Z view
Ceiling panel (sold separately)
Knockout square hole for humidifier
A B C
256 Ø6.4 Ø9.5
256 Ø6.4 Ø12.7
Ceiling bottom surface
Electric parts
box
Knockout square hole
for divide duct
For Ø150
Hanging bolt M10 or Ø3/8
(To be procured locally)
Knockout square hole for divide duct
For Ø150
D Model MMU
120 AP0242H to AP0302H
120 AP0362H to AP0562H
– 8 –
Installation Manual
(Unit:mm)
Refrigerant pipe
connecting port
(Liquid) B
Take-in port
of wires
Refrigerant pipe
connecting port
(Gas) C
Drain pipe
connecting
port
Ceiling
bottom
surface
(mm)
A B C D
256 Ø9.5 Ø15.9 120
319 Ø9.5 Ø15.9 183
EN
8-EN